Making Your Own PVC Tap Water Filter Made Easy

Do you want to make your own PVC tap water filter? If you do then you’ll need simple to follow in order to make the process as simple as possible. A PVC tap water filter is going to benefit you in different ways.  Mainly it’s going to save you money over more expensive options you might not even be satisfied with. Now the instructions we’re about to give you are all in order. We’ve done our best to make them simple to follow. If we had to rate them by saying their easy, moderately difficult or very difficult we would say they’re easy to follow. It shouldn’t take you more than half an hour to go through these.

Instructions to make your own PVC tap water filter:

• The first thing you’ll need to have is a piece of PVC pipe. It should be good quality. Now cut the needed length of a 2 and 1/2 inch diameter PVC pipe.
• 
  
• Take a drill and drill a hole right in the center of the end cap and make sure it’s the right size to go with the vinyl hose diameter for attachment or insertion.
• Put the end cap to one end of the PVC pipe.
• Put on the needed length of the vinyl hose to the hole you drilled in the end cap.
• Now take a piece of Polu-Bio-Marine  Inc.’s PolyFilter materials and roll it up. Now put it inside of the PVC pipe. After this you’ll want to activate the carbon.
• Once you’ve done all this all you’ll need to do now is either pour or run tap water right down the open end of the PVC filter. Make sure you guide the treated water properly to where you need it to go.

Some additional tips to help you

You can decide to use 100% silicone sealant in order to seal the vinyl hose as well as the end cap connection.

Here’s a simple rundown of what you’ll need again.

• 2 and 1/2 inch PVC
• 1 matching PVC end cap
• Vinyl hose
• A drill
• Activated carbon
• PolyFilter material

Making a PVC tap water filter is something that’s going to come easy for some, but others might find that they need the help of someone who has done it before. This will ensure that they do it right. Well finding someone who has made their own PVC tap water filters might be tough. What you can do if you really need to be sure about what you’re doing is watch some video footage of the process.

Now you should be able to find this easily on a website such as YouTube. This is good, because you’d be able to go back as much as you needed in order to make sure you got everything right. Your last resort could be hiring someone who knew how to make one, but you would need to make sure the cost was reasonable. We recommend giving these instructions an honest try, because they really are simple.

Different versions of instructions are also available if you want something more detailed.